Stormscope Page - Garmin G1000 Series Pilot's Manual

NOTE: Periodically clearing Stormscope lightning
data while monitoring thunderstorms is a good
way to determine if a storm is building or dissi-
pating. Stormscope lightning data in a building
storm will reappear faster and in larger numbers.
Stormscope lightning data in a dissipating storm
will appear slower and in smaller numbers.

STORMSCOPE PAGE

Stormscope lightning data is displayed on the
Stormscope Page in addition to the Navigation Map Page.
To select the Stormscope Page:
1. Turn the large FMS knob until the Map Page
group is selected.
Turn the small FMS knob until the Stormscope
2.
Page is selected (Figure 8-5).
Current Lightning
Mode
North Arrow
Indicator
Surrounding
Lightning
Strikes
Stormscope
Control Softkeys
190-00592-00 Rev. A
Stormscope Page Operations
able using softkeys or page menu options:
Figure 8-5 Stormscope Page
Garmin G1000 Pilot's Guide for the Diamond DA40
OPTIONAL EQUIPMENT
The following Stormscope Page operations are avail-
• Changing the display range
• Changing the lightning mode between cell and
strike
• Changing the viewing mode between 360° and
120° ARC
• Clearing Stormscope lightning data
To change the display range:
To change the display range on the Stormscope
Page, turn the joystick clockwise to zoom
out or counter-clockwise to zoom in. Display
ranges are 25 nm, (25 and 50) nm, (50 and
100) nm, and (100 and 200) nm.
Current Strike Rate
Map
Orientation
Active Flight
Plan or Direct To
Navigation
Weather Map
Ranges
8-5