Departure Information Page (Dp) - Garmin G1000 Series Pilot's Manual

DEPARTURE INFORMATION PAGE (DP)

The Departure Information Page shows the available
Departure Procedures (DPs; also referred to as SIDs)
for the selected airport. Where multiple runways or
transitions are associated with the departure procedure,
that information can also be displayed. A map image
provides a layout diagram for each departure, runway
and transition. To display the Departure Information Page
press the DP softkey.
To scroll through the available departures:
1. Press the FMS knob to activate the cursor.
Turn the large FMS knob to place the cursor on
2.
the Departure procedure name field.
3. Turn the small or large FMS knob to display a
window of available departures for the selected
airport. Continue turning the small FMS knob
to select the desired departure.
4. Press the ENT key. The cursor moves to the
runway field.
Turn the small FMS knob to display a window of
5.
available runways. Continue turning the small
FMS knob to select the desired runway.
Press the ENT key. The cursor moves to the
6.
Transitions field.
7. Turn the small FMS knob to display a window
of available transitions. Continue turning the
small or large FMS knob to select the desired
transition.
8. Press the ENT key. To remove the flashing
cursor, press the FMS knob.
190-00592-00 Rev. A
mation Page.
Garmin G1000 Pilot's Guide for the Diamond DA40
MULTI FUNCTION DISPLAY
NOTE: 'ALL' may appear in the runway field,
indicating the departure procedure applies to all
runways. For airports with parallel runways, 'B'
may appear at the end of the runway designation
to indicate the departure procedure applies to
both runways.
A departure can be loaded from the Departure Infor-
To load a departure procedure from the
Departure Information Page:
1. Select the desired departure, runway and transi-
tion using the steps described previously.
2. Press MENU to display the Airport Departure
Page Options.
Turn the small or large FMS knob to highlight
3.
'LOAD DEPARTURE' and press the ENT key.
4. The Active Flight Plan Page is displayed. Press
the FPL key to return to the Airport Departure
Information Page.
Figure 7-53 Departure Page Menu
7-67