Ryan 9900B/Bx - Garmin G1000 Series Pilot's Manual

To switch into Standby Mode from the Traf-
fic Page:
Press the STANDBY softkey.
Altitude Display Mode
To change the Altitude Display Mode:
Press the ALT MODE softkey then press one
of the following options: BELOW, NORMAL,
ABOVE, UNREST.
With each selection, the screen changes to display the
traffic detected within the selected altitude display range.
The G1000 screen also displays unrestricted traffic (UN-
REST) having a range of maximum specified by the KTA
870/KMH 880 Pilot' s Guide. Refer to the KTA 870/KMH
880 Pilot' s Guide for information regarding altitude dis-
play ranges. Note that confirmation is not required. The
mode is changed immediately when selected.
190-00592-00 Rev. A
Traffic Map Page Display Range
Map Page at any time.

RYAN 9900B/BX

HP (SKY 899) except for a user-initiated test mode. See
the Ryan 9900 Pilot' s Guide for more information.
Figure 8-8 Traffic Map Page (KTA 870 Test Mode)
Garmin G1000 Pilot's Guide for the Diamond DA40
OPTIONAL EQUIPMENT
The pilot can change the display range on the Traffic
To change the display range on the Traffic
Page:
Turn the RNG knob to zoom through the fol-
lowing range options:
• Honeywell KTA 870/KMH 880—2 nm, 2 and
6 nm, 6 and 12 nm, 12 and 24 nm, and 24 and
40 nm.
The Ryan 9900B/BX functions the same as SKYWATCH
8-11