Table of Contents
Advertisement
Applique
Foot
.
Zigzag foot
__
-
l
*
istitch
gives you an attractive
effect in applique work.
(1) Tack the applique piece onto the
material first, and start sewing.
(2) For sewing at the corners, put
the needle in at the outer edge,
lift the presser foot and turn the
material.
Put the presser foot down.
(3) Sew a few stitches at the end
with straight stitches, length "O",
to prevent fraying.
Embroidering
Foot . Remove the foot, the holder
and screw.
61
Use an embroidery hoop (available).
(1) Draw the desired design on the
material with a pencil or tailor's
chalk.
m
___________
(2)
Stretch the material on the em-
broidery
hoop
as firmly
and
_
I
A&
-
0
evenly as possible.
(3) Lower the presser foot lifter and
sew along the outline of the
design with satin stitch, guiding
the hoop by hand.
For a neater finish, use a fine, silky-
type thread, and loose upper tension.
*
You can choose a zigzag stitch from
three different widths.
It is not possible to change the width
while the machine is running.
33
Hide quick links:
Advertisement
Table of Contents
