Installing The Keyboard In The Tray - Dell PowerEdge 1-U Keyboard Tray Installation Manual

Figure 1-8. Installing the Keyboard in the Tray
keyboard
alignment features (2)
palmrest
4
Route the keyboard/trackball cable to the left,3 through two of the securing hooks at
the bottom of the cable enclosure, and out through the cutout in the back of the tray.
See Figure 1-9.
5
Route the keyboard/trackball cable along the arm, and press it into the securing clips along
the arm.
6
To flatten the cable bundle enough to stay inside the cable-management arm, press the cable
bundle to the arm along the entire length of the arm.
7
Close the cable cover and tighten the captive Phillips screw.
1-14
Installation Guide