Advertisement
TESTING EACH SECTION
IMPORTANT: DO NOT SKIP THIS STEP. ALWAYS CHECK ALL LED LIGHTS BEFORE CONTINUING.
1.
Using the installed trasformers, supply power to the LED light chains by connecting a temporary 120V connection to
the black and white wires on the transformer to power the LED lights.
REMEMBER: BLACK AND WHITE WIRES ARE FOR 120V POWER IN, RED AND BLACK ARE FOR LOW-VOLTAGE POWER OUT.
2.
Check to see if all LEDs are lit and working correctly.
If a module or section does not light up, is damaged, etc. —disconnect power and check connections or replace a
3.
module by splicing in another.
DO NOT APPLY 120V TO THE RED OR BLACK WIRES OR DIRECTLY TO THE LED MODULES.
SEC. 8
8
Advertisement
