Advertisement
MOUNTING STREET WRAP™ ON AN INCLINE
Caulk above (or crimp) ONE
bracket towards the middle of
each of the rest of the Street
Wrap™ to prevent it from sliding
while still allowing it to expand
and contract.
When mounting Street Wrap™ on an incline or vertically, two things
must be prevented. First the Street Wrap™ must be kept from sliding
down, while still allowing for expansion/contraction with temperature
changes. Second, water must be sealed out since it will run down the
top of the Street Wrap™.
Seal the rain shield to the upper Street Wrap™ to keep
water from penetrating.
Do NOT seal the rain shield to the lower
Street Wrap™ since the Street Wrap™ will
expand/contract.
Drill 2 holes in the
end cap to allow
water to escape.
SEC. 5
Coupling Rain Shield
5
Advertisement
