About This Manual; Third Party Software - Canon imageRUNNER ADVANCE C5550i Faq Manual

Appendix

About This Manual

Screens
Screens of the touch panel display used in this
manual are those taken when the imageRUNNER
ADVANCE C5560i has the following optional
equipment attached to it:
Booklet Finisher-Y1
•
• Buffer Pass Unit-L1
• 2/4 Hole Puncher Unit-A1
Cassette Feeding Unit-AM1
•
Super G3 FAX Board
•
Note that functions that cannot be used
depending on the model or options do not appear
on the touch panel display.
Illustrations
Illustrations used in this manual are those displayed
when the imageRUNNER ADVANCE C5560i has the
following optional equipment attached to it:
Cassette Feeding Unit-AM1
•
Trademarks
Mac is a trademark of Apple Inc.
Microsoft, Windows, Windows Vista, Windows
Server, Internet Explorer, Excel, and PowerPoint are
either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or
other countries.
Other product and company names herein may be
the trademarks of their respective owners.

Third Party Software

This Canon product (the "PRODUCT") product
includes third-party software modules. Use and
distribution of these software modules, including
any updates of such software modules
(collectively, the "SOFTWARE") are subject to
license conditions (1) through (9) below.
(1) You agree that you will comply with any
applicable export control laws, restrictions
or regulations of the countries involved
in the event that this PRODUCT including
the SOFTWARE is shipped, transferred or
exported into any country.
(2) Rights holders of the SOFTWARE retain in all
respects the title, ownership and intellectual
property rights in and to the SOFTWARE.
Except as expressly provided herein, no
license or right, expressed or implied, is
hereby conveyed or granted by rights holders
of the SOFTWARE to you for any intellectual
property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use
with the PRODUCT.
(4) You may not assign, sublicense, market,
distribute, or transfer the SOFTWARE to any
third party without prior written consent of
rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may
transfer the SOFTWARE only when (a) you
assign all of your rights to the PRODUCT
44
and all rights and obligations under the
license conditions to transferee and (b) such
transferee agrees to be bound by all these
conditions.
(6) You may not decompile, reverse engineer,
disassemble or otherwise reduce the code of
the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent,
lease or loan the SOFTWARE or create
derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make
separate copies of the SOFTWARE from the
PRODUCT.
(9) The human-readable portion (the source
code) of the SOFTWARE is not licensed to
you.
Notwithstanding (1) through (9) above, the
PRODUCT includes third-party software modules
accompanying the other license conditions, and
these software modules are subject to the other
license conditions.
Please check Platform Version of the PRODUCT
and refer to the other license conditions of third-
party software modules described in Appendix
of Manual for the corresponding Platform
Version. This Manual is available at http://canon.
com/oip-manual.
By using the PRODUCT, you shall be deemed to
have agreed to all applicable license conditions.
If you do not agree to these license conditions,
please contact your service representative.