Health & Safety - LapSafe ClassBuddy Wall User Manual

8. Health & Safety
All products manufactured by LapSafe® have been thoroughly tested and certified
by an authorised and INDEPENDENT testing house before sale.
Full CE compliance, which includes the requirements of LVD and EMC directives,
is a STANDARD FEATURE of any solution manufactured by LapSafe®, as are many
more built in safety features. CE Marking can be found on the product serial
number plate, usually at the lower rear of the cabinet. CE Declaration of
Conformity Certificate is issued with each product in the User Guide Pack.
Please be advised of the following safety advice:
At no time are the service areas of the ClassBuddy Wall to be opened by anyone
other than an authorised person.
WARNING:
incorrectly and the user should be trained to use work equipment
and have an understanding of the HSE leaflet, 'using work equipment
safely' (INDG229)
Please also refer to the manufacturers documentation for specific
information about the equipment you are using.
WARNING:
method of fixing is out of LapSafe®'s control, it is imperative that you
consult with appropriate engineering, architectural, or
construction professional to ensure that your ClassBuddy™ Wall is
mounted properly and that the substrate is suitable to handle applied
loads.
WARNING:
turn the power to the unit off.
IMPORTANT:
persons and care should be taken when lifting the ClassBuddy Wall
unit into position.
The ClassBuddy™ Wall - User Manual
Hand and power tools can be dangerous when used
Because surfaces vary widely and the fitting location and
Before removing or accessing any service area unplug or
Installation must be carried out by two responsible
Copyright LapSafe® Self-Service Solutions
9