Download Print this page

LapSafe ClassBuddy Installation Manual

Hide thumbs Also See for ClassBuddy:

Download this manual

ClassBuddy

Desk

™

Installation Guide

2019 v2.0

Need help?

Do you have a question about the ClassBuddy and is the answer not in the manual?

Page 1 ClassBuddy Desk ™ Installation Guide 2019 v2.0...
Page 2: Tools Required
This guide will take you through the steps to install your LapSafe Once unpacked, stand the unit up and ensure you have a clear working ClassBuddy® Desk. For guidance on set up and use please refer to the User space around all sides.
Page 3 Step 2: Unscrew Rear Panel Step 3: Disconnect Earth Cable On the rear of the ClassBuddy desk there are 10 screws, unscrew all of Slowly start to remove the rear panel to gain access to the connected earth these and store the screws and washers in a safe place.
Page 4 The drilling pattern is 392mm x 338mm but please allow at least 40mm from the rear of the desk. Support Enquiries lapsafe.com/support/enquiry Remove the feet fixing screws from the ClassBuddy Desk and secure support@lapsafe.com through the desk into the holes from the feet fixings. Retain the feet in 0800 130 3456 order to maintain a ventilation gap.
Page 5 0800 130 3456 sales@lapsafe.com lapsafe.com LapSafe Self-Service Solutions Ltd ® 3 Wakes Hall Business Centre Wakes Colne Colchester Essex CO6 2DY...