Related Manuals for LapSafe Traveller series
Summary of Contents for LapSafe Traveller series
-
Page 1: User Manual
The Traveller Range ™ User Manual Charge & Sync Models Date: September 2015 Version: LAPSF215_22032013V2... - Page 2 The Traveller™ Charge & Sync Range - User Manual Copyright LapSafe® Products...
-
Page 3: Table Of Contents
The Traveller™ Charge & Sync Range - User Manual Contents Page No Section Title Section No Introduction Important actions Moving your Traveller™ 6 - 9 Setting up 10 - 11 Charging 11 - 13 Syncing Warranty Care & maintainance Health & Safety Safety declaration Copyright LapSafe® Products... -
Page 4: Introduction
(5 volts) and therefore intrinsically safe and each USB connection is individually protected with a resetting fuse. Your LapSafe® Traveller™ has been designed to be simple to use and it is ready to receive your devices. All our products are manufactured to a high standard and we constantly monitor for any issues. -
Page 5: Moving Your Traveller
The Traveller™ Charge & Sync Range - User Manual 3. Moving your Traveller™ Do not attempt to move the LapSafe® Traveller™ while it is connected to a mains supply or a host laptop or pc. Switch off the power to the Traveller™ at the wall, unplug and stow the mains lead and the PC to USB link lead. -
Page 6: Setting Up
The Traveller™ Charge & Sync Range - User Manual 4. Setting up Place the LapSafe® Traveller™ on its base and release the four latches to open the lid. Inside is an individual storage slot for each of your tablets. A LapSafe® Traveller™ with ‘portrait slots’ will accept Apple iPads and similar... - Page 7 Connect a USB charge/sync lead into each individual USB socket along the edges 9). and carefully lower this assembly back of the power management unit (Figure into the foam. Refit the screws through the retaining plate. Each USB charge/sync lead now has to be routed to an individual device. Copyright LapSafe® Products...
- Page 8 The Traveller™ Charge & Sync Range - User Manual Figure 9 Connecting USB leads LapSafe® Travellers™ with foam storage compartments With the foam plug removed from the central slot locate the small individual 10). split-holes designed to hold each lead...
- Page 9 Load your tablets into their individual storage compartments and connect a charge/sync lead to each device. (Make sure the charge/sync connectors all face upwards) Note: The foam in the lid of the LapSafe® Traveller™ allows room for the connectors when the lid is closed. Copyright LapSafe® Products...
-
Page 10: Charging
(Figure 14). If you have purchased any of the other versions of the LapSafe® Traveller™ the mains lead connection is on the outside of the case, at the left hand end (Figure 15). -
Page 11: Syncing
To override the ‘Full Auto’ mode, press the mode button on the power section 6. management unit as described in 6. Syncing The LapSafe® Traveller™ is supplied with a USB A to USB B lead for connecting to a (Figure 16). host PC or laptop Sync –... - Page 12 ‘All Charge’ mode Pressing twice after power-up, will also select ‘All Charge’ mode. BLUE GREEN lights off, AMBER light flashing slowly - waiting for iPads/tablets to be connected = charging on standby. Figure 16 Connecting supplied USB lead Copyright LapSafe® Products...
-
Page 13: Warranty
From the ‘All Sync’ mode, pressing the black button again, returns the module to the default ‘Sync then Charge’ mode. 7. Warranty All of our products come with a Lifetime Parts & Labour Warranty. To activate your FREE Lifetime* Parts and Labour Warranty, please go on-line and register at lapsafe.com/activate Copyright LapSafe® Products... -
Page 14: Care & Maintainance
• Do not leave case in the view of a window for security • Do not try to modify the case in anyway without contacting LapSafe® first to check that it is safe to do so 9. Health & Safety Safety is of paramount importance to LapSafe Products®... -
Page 15: Safety Declaration
LapSafe® Products have been designed from the outset with safety internal circuitry as standard so as NOT to retain or present any significant residual voltage in this way. - Page 16 The Traveller™ Charge & Sync Range - User Manual Powering Smart Technologies Copyright LapSafe® Products...
Need help?
Do you have a question about the Traveller series and is the answer not in the manual?
Questions and answers