Important Actions; Getting Started - LapSafe ClassBuddy Wall User Manual

2. Important actions

Upon delivery of your new ClassBuddy™ Wall you must:
• Take a note and store in a safe place your product serial number which can
be found located on the top of the unit. The silver plate will hold your serial
number that begins with CB. You will need to quote this number for all
enquiries relating to your trolley.
• Take a note of your key number located on the key itself and store this in a
safe and secure place. You will need this if you wish to order additional keys.
• Visit lapsafe.com/activate
will not be valid unless you do this.
• Read the section on 'Health & Safety'

3. Getting started

There are ventilation holes through the base and on the top of the ClassBuddy
Wall, and care must be taken that none of these holes are obstructed.
The front left door of your ClassBuddy™ is unlocked using the key with the white
key cover, and the right door has a separate key with a black key cover.
The front left door is for everyday working access to the cabinet. The key can be
removed once the door is open, this will prevent the door from closing fully whilst
it is unlocked.
The right door should not be considered as day-to-day access to the cabinet but
used for initial setup by a responsible/authorised person.
The ClassBuddy™ Wall - User Manual
to activate your Lifetime warranty. Your warranty
Copyright LapSafe® Self-Service Solutions
(Section 8)
5