Charge Only - Set Up - LapSafe ClassBuddy Wall User Manual

4. Charge only - set up

1. Open both front doors
2. You will find power strips for your AC adaptors in the right side compartment
3. Some AC adaptors can be described as 'in-plug' where they plug directly into
a socket and the charging lead goes directly to the device, and others can
be described as 'in-line' where they have a mains lead between the power
socket and the AC adaptor and then a charging lead going to the device.
4. For 'in-plug' AC adaptors simply pass the charging lead behind the divider
onto a shelf
5. If you are using 'in-line' AC adaptors you have the choice to pass the mains
lead behind the divider and place the adaptor on the shelf with your devices
or to leave the AC adaptor in the right side compartment and just pass the
charging lead behind the divider onto the shelf.
6. We provide both cable ties and cable clips to help with cable management
and we recommend that the charging lead is secured to the shelf in a
suitable position in order to prevent it 'working' its way off the shelf.
Repeat these steps until your wall unit is fully loaded.
NOTE: Maximum loading 100Watt (rated capacity) per socket. (400Watts (rated
capacity) per power strip).
6
The ClassBuddy™ Wall - User Manual
in-plug AC adaptor
Copyright LapSafe® Self-Service Solutions
in-line AC adaptor