Maintenance - Makita 1100 Instruction Manual

Hide thumbs Also See for 1100:

Table of Contents

Chamfering

To make a chamfering cut as shown in the figure, align

the "V" groove in the front base with the edge of the

workpiece and plane it.

► 1 . V groove

0.3 - 0.6 mm

MAINTENANCE

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspec-

tion or maintenance.

•

Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks

may result.

To maintain product SAFETY and RELIABILITY, repairs,

carbon brush inspection and replacement, any other

maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always

using Makita replacement parts.

Sharpening the planer blades

For standard blades only

Always keep your blades sharp for the best perfor-

mance possible. Use the sharpening holder to remove

nicks and produce a fine edge.

► 1 . Sharpening holder

First, loosen the two wing nuts on the holder and insert

the blades (A) and (B), so that they contact the sides

► 1 . Wing nut 2. Blade (A) 3. Blade (B) 4. Side (D)

5. Side (C)

9 ENGLISH

Table of Contents