Gira System 106 Installation Instructions page 3

8.
CLICK
Attach safety bond (l: 120 mm).
9.
A
B
Swivel the function carriers into the
surface-mounted housings (A). Do not pinch
any cables.
Pay attention to the position of the line material
and the safety bound!
With 4-gang and 5-gang surface-mounted
housings, observe additional snap lock (B).
10.
Close surface-mounting housing using the
included bit and bit holder (keep for future use).
The bit holder shaft is slightly flexible and will
twist once the tightening torque of the lock screw
is reached.
After completed installation check all gap sizes for
tightness. The lock screw may not protrude.
GIRA
Girsiepen GmbH & Co KG
Elektro-Installations-Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 1220
42461 Radevormwald
Tel.: +49 2195 602 - 0
Fax: +49 2195 602 - 191
www.gira.de
info@gira.de