Page 1
#61-791 MEGGER ® Hand-held Insulation & Continuity Tester 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com...
Page 2
SAFETY WARNINGS Safety warnings and precautions must be read and understood before the instrument is used. They must be observed during use. The circuit under test must be switched off, de - energised and isolated before Insulation or Continuity tests are made. The test button must not be held down while connecting the test leads or while changing ranges.
Page 3
Leads Low Battery DISPLAY FEATURES Nulled High 1000V Voltage 100 M 10 M Fuse Default Ruptured Voltage 100k The 61-791 has the following features: 1mA Insulation test current 200mA Continuity test with lead zeroing facility Combined curved Analogue / Digital display Continuity Beeper Auto shut off Display Back light...
Page 4
Insulation Testing Turn the instrument ‘On‘ by selecting the MΩ range. Connect the test probes to the isolated circuit under test. Press and hold the push button; the display shows the insulation value.The reading will remain displayed for a few seconds after the push button is released.
Page 5
voltmeter on all switch positions except ‘OFF’ and . In addition, the beeper will sound on all switch positions except ‘OFF‘ and . All selected tests will be inhibited except for Insulation tests, which will remain available until the voltage exceeds 55 V.
Page 6
Lifetime Limited Warranty This meter is warranted to the original purchaser against defects in material or workmanship for the lifetime of the meter. During this warranty period, IDEAL INDUSTRIES, INC. will, at its option, replace or repair the defective unit, subject to verification of the defect or malfunction.
Need help?
Do you have a question about the IDEAL 61-791 and is the answer not in the manual?
Questions and answers