Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
How to Use Your Digital Camera
The camera is capable of taking and storing 26 VGA(640 x 480
Pixels) images or 107 QVGA(320 x 240 Pixels) Images. These
images may be uploaded to a PC via the USB port.
The camera has two switches on it.
SW1 is the shutter switch.SW2 is the mode switch.
The LCD display is combined with SW2 to show the setting
information.
Installing Batteries
The
Digital Camera
is powered by 2 AAA batteries, or via the USB
connector when attached to a PC.
When the batteries are unloaded, all of your stored pictures will be
lost.
Switching the camera on
Pressing the SW2 when the LCD is blank will power
on the camera. The camera will automatically
power off after 30 seconds of inactivity. The LCD
indicates the camera mode either "Lr" for low
resolution (QVGA images) or "Hr" for high
resolution(VGA images). The LCD then displays the
number of pictures you have remaining.
Press the shutter button to take a picture. A high pitched beep indicates that the picture was taken
successfully and the counter will decrease accordingly. A low beep indicates insufficient light to take a
picture. A series of beeps is an indication that the camera is full.
Pressing the mode switch repeatedly cycles through additional features as displayed on the LCD. When a
given feature is displayed it may be selected by pressing the shutter button. If an option is not selected
within 5 seconds the display will revert back to the number of available pictures.
Introduction
User Interface
***Notes ***
Taking a picture
Additional features
Press SW2 to change features
Features are displayed
Press SW1 to select mode
My digital eye!
View Finder
Lens
USB Port
Shutter Switch(
Mode Switch(
LCD Display
Battery Cover
OFF
ON
(Picture remaining number)
SW1
)
SW2
)
Advertisement
Table of Contents
