How To Use Your Digital Camera; Rechargeable Batteries - AIPTEK PenCam Ultra Installation Manual

English

How to Use Your Digital Camera

The built-in memory of your camera is 64 Mbit memory. It supports two kinds
of resolution- high resolution ( 640x480 VGA) pictures and low resolution (
320x240 QVGA ) pictures. Besides, your camera offers several functions on
the LCD, showing the remaining number of pictures as well. With a USB
cable, you can transfer all the pictures to your PC.
1. The batteries haven't contained any electricity before you recharge the
batteries. When using your camera for the first time, please connect the USB
cable with your camera and your PC and the batteries will be recharged via
you PC. The first recharging hours shall be over 8 hours.
2.After using your camera for two or three hours, you'll see the LCD starts
blinking, which indicates there is no sufficient electricity. Meanwhile, you
should connect the USB cable with your camera and your PC. Your PC is
recharging the batteries in your camera while you are transferring photos to
your PC. The rechargeable batteries led shows green light while full of
electricity; it shows red light while still recharging.
3.When batteries are removed, all of the stored pictures are cleared.
( Battery Capacity: continuous snapshot for 2 hours, stand by works for
approximately 1 weeks.)
Introduction

Rechargeable Batteries

.. 1 ..