Table of Contents
Advertisement
PRODUCT OVERVIEW
Front Panel
1. SOURCE/MODE/3s: Momentarily press the button to switch to the next source in
the list. Press and hold the button for about 3 seconds to switch between Auto and
Manual switching modes.
2. POWER: The LED illuminates red when power is applied.
3. AUTO: The LED illuminates green when in Auto switching mode and is off when in
Manual switching mode.
4. INPUTS: The LED corresponding to the currently selected source device illuminates
green. The LEDs corresponding to the unselected sources illuminate orange.
Rear Panel
1. OUT: Connect to the display using a High Speed HDMI® Cable (not included).
2. IN #: Connect to the HDMI video sources using High Speed HDMI Cables (not
included).
3. RS232 Input Jack: 3.5mm jack for connecting the included RS-232 cable.
4. IR In: 3.5mm jack for connecting the included IR receiver.
5. EDID: Four DIP switches for using a fixed or user-defined EDID® setting.
5
Advertisement
Table of Contents
