Audio de-embedding via analog and optical fiber audio ports
•
Support volume control and independent audio selection
•
Support OSD navigation for advanced setting
•
EDID management
•
Control via front panel buttons, IR remote, OSD menu navigation, Controller software, RS-232
•
commands
Compact design for easy and flexible installation
•
PACKAGE CONTENTS
Take an inventory of the package contents to make sure you have all the items listed below.
Please contact Monoprice Customer Service for a replacement if anything is missing or damaged.
1x 4K60 4 × 1 Multiviewer Video Switcher
•
1x IR Remote Control
•
1x 3-pin 3.81 mm Phoenix Connector (male)
•
1x
•
38 kHz IR Wideband Receiver Cable (1.5 meters)
2x Mounting Ears
•
PRODUCT OVERVIEW
A. FRONT PANEL
1
POWER BUTTON
2
POWER LED
3
INPUT 1-4 LEDS
4
AUTO LED
5
IR WINDOW
6
AUTO BUTTON
7
INPUT BUTTON
Short press this button to power on the device.
•
Long press this button for 1 second to enter standby mode.
•
The Power LED will light in green when the product is powered on, and red when
the product is on standby.
Input signal indicator lights.
In single-screen display mode, the corresponding green LED will be on when the
HDMI OUTPUT port outputs the signal from the HD 1/2/3/4 port.
In multiview mode, all input signal LEDs will light in green.
When the device is in AUTO mode, the AUTO LED will light in green, and HDMI is
automatically identified. When the currently displayed source signal is
disconnected, the switcher will automatically identify the next connected HDMI
input port.
IR signal receiving window.
Automatic switching button, only available in single-screen display mode.
Input source switching button, only available in single-screen display mode.
4x Machine Screws (KM3*4)
•
4x Rubber Feet
•
1x 12V/2.5A Locking Power Adapter
•
1x User Manual
•