Set Symbolic Representation; Use Symbolic Names In Protool - Siemens SIMATIC C7-621 Manual

A 03/99

Set symbolic representation

To enable the symbolic names to be displayed in your program, you must set the appropriate type of
representation.
Open Function FC15 in the offline database. In the LAD/STL/FBD Editor that appears, select the
menu item View → Display → Symbolic Representation . The absolute addresses are replaced by
the symbolic names.
You can display the absolute addresses and the comments from the symbol table by activating View
→ Display → Symbol Information . The network comments are then no longer visible.
Note
If you want to include new operands during programming, you can assign symbolic names to individual
absolute addresses by activating the menu item Options → Simbol Table from the LAD/STL/FBD Editor.
The entries are automatically inserted in the symbol table.

Use symbolic names in ProTool

Before you can use symbolic names in ProTool you must define certain settings.
To do this, open the Hardware folder in the SIMATIC Manager by double-clicking. The Hardware
Configurator appears.
First Steps with the C7-621
6ZB5610-0AF02-0BA0
Symbolic addressing
41