Advertisement
1. Technical data Art. 215880
Area of application: For the creation of an electrical connection by means of compression
Scope of delivery:
Pressing force:
Oil type:
Feed rate:
Safety:
Structure:
Guarantee:
2. Area of work Art. 215880
• Pressing force in kN: 60 kN
• Working pressure in bar: 700
• Head can be opened
• Opening / Hub: 17 mm
• Pressing width: slim
• Motorstop
• Crimping range cable lugs: Cu 10-240 / DIN Cu 10-240 / DIN Al 16-185
• Crimping range connectors: Cu 10-240 / DIN Cu 10-240 / DIN Al 16-185
• Pressing time, battery-operated in seconds: 6
• Battery charging time in minutes: 60
• Battery type: NiMH, 14,4 V, 3 Ah
• Dual-piston pump
• Length in mm: 335
• Weight in kg: 4,5
• Weight Set in kg: 8,5
3. Operating instructions
Before starting up the tool, read the operating instructions first.
All current-carrying elements in the area you are working in should be disconnected.
Otherwise the protective procedures for working in the vicinity of components under current
must be implemented. (DIN EN 50110)
Do not use the tool if you are tired or under the influence of medication, drugs or alcohol.
Take into account the valid accident prevention and safety regulations and use the tool exclusi-
vely for the purpose for which it is intended.
Only electro-technically trained persons over 16 years of age may process connecting materials
using the tool.
1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case,
without dies.
60 kN
ISO class viscosity 15
2 speeds: Closing (fast) feed to bring the pressing dies to the
conductor and working feed for compression.
Switching between the two speeds is carried out automatically.
The tool is fitted with a safety value that has been set at the factory.
The working head can be rotated by 180° to make it easier to adapt to
the operation to be carried out. The model Art. 215880 does not protect
the operator when working on cables that carry power.
2 year guarantee if used for the purpose it is intended.
Advertisement
