Advertisement
The operating instructions must always be carried with the tool.
The instructions must have been read and understood by the user.
The operator must ensure that this is the case.
Operating:
• Select the appropriate pressing dies for the connection to be pressed.
• Insert the pressing dies in the tool head. They are made up of two parts with identical
external measurements, so that they both can be inserted at will into the piston or the head.
• The procedure for inserting pressing dies is identical for mounting to both piston and head.
Start:
- Bring the tool to the working position.
- Select the appropriate pressing dies for the connection to be pressed.
- Insert the pressing dies in the tool head.
- Feed the conductor into the connector.
- Place the connector between the two pressing dies.
- Approach of the pressing dies (closing feed rate)
- Hold the tool securely and press the operating button to move the piston quickly forwards
until the pressing dies meet the connector to be compressed.
- As soon as the pressing dies start to compress the connectors, the system automatically
switches from closing feed to working feed.
Die holder
Pushbutton
to advance
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Pushbutton for
return movement
... convincing solutions
Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
english
Advertisement
