1. Technical data Art. 215880 Area of application: For the creation of an electrical connection by means of compression Scope of delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. Pressing force: 60 kN Oil type: ISO class viscosity 15 Feed rate:...
Page 3
Die holder Pushbutton for return movement Pushbutton to advance … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
- Press until the pressure limiter can be heard or the pressing dies meet. - Pressing the front operating button takes the pressure off the system and piston travels back (fully or partially, to directly carry out a second compression action). 4.
Check to see whether the switch on the machine automatically pops out again when you release it. … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Page 6
Ensure that the oil level is always sufficient. Do not fill the tank with unsuitable oil or brake fluid. Oil type: VESTA HLP-15 from VERKOL or an oil of a similar quality. Remove the tank lid and top up the oil. The oil must be filtered first. If necessary, purchase the required oil from the HAUPA (Art. 216254).
Page 8
1. Item code number 2. Item description 3. Instruction manual reference and/or date 4. Tool type 5. Tool serial number The guarantee will become void if spares other than the HAUPA original spares are used. Spare parts list art. 215880 Description Description Description...