Related Manuals for haupa HS-8
Summary of Contents for haupa HS-8
- Page 1 Hydraulic punching tools INSTRUCTION MANUAL Hydraulic hand punching tool „HS 8“ Art. 2176 04 … convincing solutions...
-
Page 2: Technical Data
HAUPA cannot legally be held responsible for any damage or injury sustained which is related to incorrect usage of the tool or as a result of poor maintenance. -
Page 3: Tool Operation
9. Keep children, pets and unauthorized persons away from the workplace. 10. Keep the safety instructions with the tool. Tool – Operation HS-8 is a tool for punching plates according cutting material (s. Technical Data). Please consider the following constructions to ensure an operation without any problems. - Page 4 5-Close the drain valve by reversing 6-Pump movements till the plate is the lowering lever (push). separated by the cutting edge. 7- Pull package including button out. 8- Activate return by throwing the lowering lever. 9- unscrew the cutting edge and remove the button.
-
Page 5: Troubleshooting
4 Trouble – Shooting Problem Possible cause 1 / 4 / 6 • No lift in spite of pump movements! • Lift yes, but without force! • Lift doesn’t reach whole distance! 2 / 4 • No return! • No complete return! •... -
Page 6: Spare Parts
00-022-08 Support ring 50-066-11 Handhold 00-013-21 Pressure spring 00-143-01 Seal disc 00-143-04 EO-valve 00-143-02 Cover disc 00-049-07 Headless pin 00-143-03 Washer 00-031-34 Cheese head screw 00-143-05 Cone 00-005-01 Lock washer 80-163-146 Handle cover Please use only original HAUPA spare parts! -
Page 7: Special Advice
Special Advice HAUPA will not be held responsible if the tool is operated without reference to the appropriate operating instructions manual. Request for the appropriate manual must be made to HAUPA before the unit is used. Failure to comply with this requirement will result in the operator being entirely responsible for their action and any possible damage or injury which may occur as a result. - Page 8 Contour HS-8...