Hengstler Signo 721.2 User Manual page 153

Duty cycle
Overload protection
Overload protection
Relay output
Sensor supply
Storage of values
Electrical connections
Cable cross-section
Amplitude threshold
Active edge
100%
external fuse
DC: 0,16 AT (IEC 127);
DC: 0,2 AT (UL 198)
24 VAC: 315 mAT
230 VAC: 32 mAT; 115 VAC: 63 mA T
100-240 VAC (switch-mode power supply), 630mAT/250V G-fuse plug
external fuse 230 V, 2,5 mA T
24/115/230 VAC
AC-operation: 12-24 VDC (load dependent), max. 50 mA
100-240 VAC (switching power supply)
AC-operation: 24VDC/-5%, max. 115 mA
max. capacitive load = 470 µF
NV-memory > 10 years
Plug-in screw-type connections / Terminals
1...1.5 mm² with wire-end sleeves
< 2 V and > 8 V or < 1 V and > 4 V at TTL-level
amplitude max. 40 VDC
programmable, positive for PNP-input,
negativ for NPN-input
153
7 Technical Data