Verification Steps - Avaya 96x1 Series Application Notes

5.2. Configure a Station for Avaya 96x1 IP Deskphones (SIP)
The configuration for SIP station is performed partially via the System Access Terminal (SAT)
on Communication Manager. The rest of the configurations are performed via the System
Manager. There is an option to generate SIP station without using the SAT when adding a new
SIP user using System Manager. The details will not be covered in this document. Please refer
to the application notes in [3] for details. Below shows the SIP Station with Type 9641SIP
configured.
display station 10049
Extension: 10049
Type: 9641SIP
Port: S00138
Name: AVAYA, SIP3
STATION OPTIONS
Location:
Loss Group: 19
Display Language: english
Survivable COR: internal
Survivable Trunk Dest? y
6. Configure Jabra BIZ 2300 QD
No configuration is required for the Jabra headset. The QD cable has to be connected to the
phone on one end and the headset on the other.

7. Verification Steps

Verify that the Jabra headset has been connected to the Avaya 96x1 Series IP Deskphone. Once
the headset is connected to the phone, verify that incoming and outgoing calls are established
with two-way audio to the headset and that the headset can get dial tone and end an active call.
8. Conclusion
These Application Notes describe the configuration steps required to integrate the Jabra BIZ
2300 QD Headset with Avaya 96x1 Series IP Deskphones. All test cases were completed
successfully.
LYM; Reviewed:
SPOC 8/24/2014
STATION
Coverage Path 1:
Coverage Path 2:
Hunt-to Station:
Solution & Interoperability Test Lab Application Notes
©2014 Avaya Inc. All Rights Reserved.
Lock Messages? n
Security Code:
Time of Day Lock Table:
Message Lamp Ext: 10049
Button Modules: 0
IP SoftPhone? n
IP Video? n
Page 1 of 6
BCC: 0
TN: 1
COR: 1
COS: 1
7 of 9
Biz2300QD-96x1