Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SOMNOmedics SOMNOwatch plus
Summary of Contents for SOMNOmedics SOMNOwatch plus
- Page 1 NSTRUCTION MANUAL Home Sleep Camera with SOMNOwatch plus...
- Page 2 Tel.: (+49) 931 / 35 90 94 – 0 Fax: (+49) 931 / 35 90 94 - 49 E-Mail: info@somnomedics.de Internet: www.somnomedics.eu Rev. 1 24.05.2019 All proper names marked with TM are copyright protected by SOMNOmedics. 2/12 © Copyright SOMNOmedics GmbH Rev.1...
-
Page 3: Table Of Contents
Rev.C or higher) and the analysis of the synchronised video, DOMINO light software 1.5.0 or higher is required. An online measurement is not possible with the Home Sleep Camera. SOMNOmedics offers a range of video cameras for stationary applications with online measurements. -
Page 4: About The Home Sleep Camera
Figure 2: Rear side of the Home Sleep Camera The installation of the Home Sleep Camera and the implementation on to your network is normally done by SOMNOmedics service or your local distributor. Status LED: glows faintly if power supply is plugged in... -
Page 5: Initialisation And Synchronization
The IP-address of the Home Sleep Camera should already be set. If not, you will need to enter it now. The configuration data for the recording are sent to the SOMNOwatch plus and the camera. 5/12 © Copyright SOMNOmedics GmbH Rev.1... - Page 6 Figure 5: Initialise a new recording in the advanced mode The SOMNOwatch plus and the camera automatically start recording at the set time. The IR-illumination from the camera starts automatically at the predefined start time. 6/12 © Copyright SOMNOmedics GmbH Rev.1...
-
Page 7: Import Of The Video
Figure 6: File-menu in analysis window Figure 7: Video Import from camera storage Note: The video can only be imported to the corresponding recording of the SOMNOwatch plus (same device and recording time)! Other video files are not displayed. 7/12 © Copyright SOMNOmedics GmbH Rev.1... -
Page 8: Manually From The Usb-Stick Of The Camera
(4). Click “Download” (5) to start the transfer of the video. The video is now imported and saved with the recording. This needs approximatelly 2 s per hour of recorded video e.g., ~30 s for 12 h video duration. 8/12 © Copyright SOMNOmedics GmbH Rev.1... - Page 9 It is recommended to disconnect and connect the USB-stick to the Home Sleep Camera only if the camera is disconnected from mains power supply. The Home Sleep Camera must be restarted after connecting the USB-stick. 9/12 © Copyright SOMNOmedics GmbH Rev.1...
-
Page 10: Mounting The Camera At Home (Patient Guide)
Please don’t be alarmed if the front and upper part of the camera gets warm. This is due to the IR-illumination and is part of the normal functioning of the device. 10/12 © Copyright SOMNOmedics GmbH Rev.1... -
Page 11: Technical Specification
Camera was not plugged in Redo the measurement video files could be found”. by patient. USB-stick is broken Connect USB-stick to com- puter. If it is not identified, contact SOMNOmedics or your distributor to get a new 11/12 © Copyright SOMNOmedics GmbH Rev.1... -
Page 12: Contact
When this happens, please leave your name and telephone number so that we can call you back as soon as possible. 12/12 © Copyright SOMNOmedics GmbH Rev.1...
Need help?
Do you have a question about the SOMNOwatch plus and is the answer not in the manual?
Questions and answers