Creating Rooms; Adding An Output To A Room; Configuring A Room - Danfoss Link Hydronic Controller Installation Manual

Installation Guide Danfoss Link™ HC
5.3

Creating rooms

Danfoss recommends to create and add device(s) to one room in a single step, and there-
after move on to the next room.
Service Options
1
Rooms and Devices
5.4

Adding an output to a room

Note! Configuring Danfoss Link™ HC is made from the Danfoss Link™ CC.
For further information, see separate instruction.
Configure Room
1
Room devices
Select Device
4
Select
Actuator Settings
7
Select type / OK
5.5

Configuring a room

Configure Room
1
Heating regulation
8 06/2013
Rooms and Devices
2
Add New Room
?
Room Devices
2
Add a device
?
Select Output
5
Select from list
?
?
Heating Regulation
2
Select type
?
VIFZL402
Edit Room Name
3
Enter/Edit Room Name
?
Room Devices
3
Use an output
?
Select Heating Emitter
6
Actuator Setting
?
Forecasting method:
By activation of the fore-
cast method, the system
will automatically predict
the heating start-up time
necessary to reach desired
room temperature at de-
sired time.
?
Danfoss Heating Solutions
?
?
?