Duramaxx 10032724 Instruction Manual page 31

Button
3 PINPOINT
4 ELIM
5 DISCRIM
6 SENS
7 GROUND
BALANCE
Function
Press and hold the PINPOINT key to determine
the exact location of a target that is hidden in
the ground, behind a wall, or inside another
object. When pinpointing, the PINPOINT scale
indicates the signal strength. The closer the
detector is to the metal object, the brighter the
indicator light will become and the louder the
beep will sound.
This button can be used in conjunction with the
DISCRIM button to eliminate certain metals.
Press and hold the ELIM button for three
seconds. An indicator will light up on the screen
to confirm activation.
Remove metal types by pressing DISCRIM [+]
or [-].
Choose between 8 different levels of sensitivity
by pressing the [+] or [-] key. If all the lights are
on, this means it is set to the highest sensitivity.
If you encounter interference, reducing
sensitivity will provide better detection (not
relevant to pinpoint mode).
Used in PINPOINT mode. By default, the
position [P] is set. For heavily mineralized soils,
ground balance should be used. Move the coil
of the detector close to the ground and turn the
knob until you eliminate as much background
noise as possible.
EN
31