Copyright And Intellectual Property Rights; Limitation Of Liability - DENTSPLY Multimat2Sinter Instructions For Use Manual

Tips and recommendations
NOTE:
Highlights useful tips, recommendations and information for efficient and trouble-free
operation.
Special
safety To draw attention to special hazards, safety precautions use the following symbols:
instructions
DANGER!
Electric current is a life hazard!
Indicates life-threatening situations caused by electric current. Failure to follow the safety
instructions can result in severe injury or death.
1.3

Copyright and intellectual property rights

© 2012 DeguDent GmbH
All rights pertaining to these Instructions for Use, including but not limited to photocopying and dissemination
as well as translation, are reserved for DeguDent GmbH. Specifically, these Instructions for Use must not,
whether in whole or in part, be reproduced in any form (print, photocopy, microfilm or other technologies)
and/or stored, processed, copied or disseminated using electronic data storage and retrieval systems without
prior written approval by DeguDent GmbH.
All violations will be prosecuted. The guilty party may be liable for damages. All intellectual property,
trademark, service mark and other rights are reserved by DeguDent GmbH.
1.4

Limitation of liability

All statements and information in this manual have been compiled in accordance with applicable standards
and regulations, the current state of the art and our many years of knowledge and experience.
The manufacturer will not be responsible for any injuries or damage caused by:

Non-compliance with the instructions

Improper use

Use of untrained staff

Unauthorized redesigns

Technical modifications

Use of unauthorized parts
The actual scope of delivery may deviate from the following explanations and descriptions in the case of
special models, additional ordering options or technical updates.
The sale, delivery and operation of this unit are subject to the mutual rights and obligations laid down in the
purchasing agreement, the manufacturer's Terms and Conditions and the laws and regulations applicable at
the time of agreement.
We reserve the right to make technical changes to improve the performance properties of the unit or to
accommodate technological progress.
Page 5