Automatic Power-On; Monitor System Status - Keysight Technologies M9037A User Manual

Using the Controller

Automatic Power-on

By the default setting, the M9037A will turn on as soon as it senses that power is
applied. This means that the chassis will power up as soon as you insert the
controller into an chassis. Alternate BIOS settings are:
- Start the system only when the chassis power switch is pressed
- Power the system to its last power state prior to losing power.
This can be configured from the Main BIOS screen > Power-up Mode.

Monitor System Status

The BIOS monitors the following on the controller module:
- PCIe switch temperature
- CPU temperature
- Main PC board temperature
- Power supply voltages
These can be observed from the Main BIOS screen > System Management.
36 Keysight M9037A PXIe Embedded Controller User Guide
BIOS Settings