Avaya Configuring IP Office R8.0 Application Notes page 15

6.4. Configure Quick Dialling Buttons
Select Basic Settings  Phone book from the left menu and select one of the positions (e.g. 1 to
10 as shown below) to configure it. The position number corresponds to the Quick Dialling
Button on the Helios IP. For example, the following shows the configuration for Position 1.

Position enabled:

Position name:

Number 1:
calling the Sequential Hunt Group created in Section 5.4.
For the description and usage of all other fields on the page, e.g. door-lock codes, activation
codes, refer to Section 9 Reference [2].
RP; Reviewed:
SPOC 6/25/2012
Select Yes.
Enter a descriptive name.
Enter the number to call when the button is pressed, for example,
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
15 of 19
2NHeliosIP-IPO8