Advertisement
3A-3
Drill 4pilot holes using a
(5.5mm) Wood Drill
bit.Make sure the depth is not less than
60mm.
STEP 3B Solid Concrete or Concrete Block Option
WARNING:
Avoid potential personal injury or property damage! DO NOT
over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until the
washers [A2] are pulled firmly against the wall plate [01].
WARNING:
Ensure the wall plate is securely fastened to the wall
before continuing on to the next step.
WARNING:
Avoid potential personal injuries and property damage!
● Mount the arm assembly/wall plate [01] directly onto the concrete
surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
60
5.5
7/32 in.
diameter drill
3A-4
Mount the wall plate using 4 sets of M8X65
in.lag bolts A1 and washers A2 with a
in.socket wrench(not included).
5
1
/
2
03
A2
01
1/2in.(13mm)
socket wrench
Wall
Anchor
A3
A1
Advertisement
