Advertisement
Quick Links
MEDIUM FULL-MOTION TV WALL MOUNT
V3.0
PSMFK9
Thank you for choosing our product! We strive to provide the
best quality and services for our customers. Would you kindly
share your experience on Amazon if you are satisfied? Should
you have any issues, please don't hesitate to contact us.
Telephone：
800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：
supportus@perlesmith.com(US/CA/DE/UK/FR/IT/ES/JP/AU)
Advertisement
Related Manuals for Perlesmith PSMFK9
Summary of Contents for Perlesmith PSMFK9
- Page 1 MEDIUM FULL-MOTION TV WALL MOUNT V3.0 PSMFK9 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
-
Page 2: Supplied Parts
This product may contain moving parts. Use with caution. DO NOT INSTALL INTO DRYWALL ALONE. Please check www.perlesmith.com for more products and company information. Tools Needed (Not lncluded) Stud finder Tape measure... -
Page 3: Supplied Hardware
Supplied Hardware Hardware for Attaching Wall Plate to Wall Wall Lag Bolts Washers CAUTION! Anchor M8X65 These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. Hardware for Attaching TV Bracket to TV Spacers Spacers Washers... - Page 4 Step 1 Before TV Bracket Installation Manual Only! Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8) to use When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
- Page 5 STEP 3 Attach Wall Plate to Wall For wood stud installation, follow STEP 3A For concrete installation, follow STEP 3B STEP 3A Wood Stud Option WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the wall plate [01].
- Page 6 3A-3 3A-4 Mount the wall plate using 4 sets of M8X65 in.lag bolts A1 and washers A2 with a in.socket wrench(not included). 7/32 in. Drill 4pilot holes using a (5.5mm) Wood Drill diameter drill bit.Make sure the depth is not less than 60mm.
- Page 7 70mm 3B-1 3B-2 ø10mm Drill 4 pilot holes using a 25/64 in.(10mm) diameter drill bit.Make sure the depth is not less than 2 in.(70mm). Position the wall plate at your desired height, level the wall plate and mark the pilot hole locations. 3B-3 Use the hammer to knock Install wall plate using lag bolts [A1], washers [A2] and anchors...
-
Page 8: Step 5 Level Adjustment
Step 5 Level Adjustment If needed, the TV can be leveled Step 6 Tilt Adjustment Tilt adjustment 25/64in.(10mm) socket wrench...