Advertisement
Table of Contents
- 1 Warning
- 2 Tools Needed (Not Included)
- 3 Maximum Weight Capacity
- 4 Supplied Hardware
- 5 Before TV Bracket Installation
- 6 Check TV Screws
- 7 Install TV Bracket
- 8 For Flat Screen TV
- 9 Attach the Extensions to the Wall Plate
- 10 Install Arm Extensions then Fasten It
- 11 Hang TV
- 12 Secure TV
- 13 Step 8 Tilt Adjustment
- 14 Step 9 Level Adjustment
- Download this manual
Advertisement
Table of Contents
Related Manuals for Perlesmith PSLFK1-24
Summary of Contents for Perlesmith PSLFK1-24
- Page 1 LARGE FULL-MOTION TV WALL MOUNT V5.0 PSLFK1-24 supportus@perlesmith.com...
- Page 2 Do not install or assemble if the product or hardware is damaged or missing. Not all parts and hardware included must be used. If you require replacement parts, contact customer service at supportus@perlesmith.com. This product has been designed for use on a vertical wall constructed of wood studs. Wood studs being defined as a wall consisting of a minimum of 2”...
- Page 3 Supplied Hardware Arm and Wall Plate Front Support Wall Extension A Arm Extensions Wall Extension B TV Bracket Philips Screws Philips Screws Philips Screws Spacers Washers Spacers Nuts Allen Washers M4 x 12mm M6 x 15mm M8 x 15mm L10mm Ø6mm L5mm Wrench...
- Page 4 Step 1 Before TV Bracket Installation Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectangle) and check that these taken measures are within the VESA(*) range for this wall mount.
- Page 5 Step 2 Install TV Bracket For Flat Screen TV For Curved TV...
- Page 6 Step 3 Attach the Extensions to the Wall Plate for studs with the sapce between 16.5”to 18” for 18”to 24”space studs Extension A 0.6in 0.6in 0.6in 0.6in Extension B Only one side need to attach each of The wall plate extensions can be moved extensions A and B.
- Page 7 Step 4A Use a stud finder (not included) to locate wood studs. Mark the edge and center locations. Use wall plate to mark mounting location x4 Mark the 4 inside holes for locations for 24”space studs. 18”space studs. left right Holes pattern for 16.5”to 18”space studs.
- Page 8 Drill 4 pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Make sure the depth is not less than 2 3/4” (70mm). in. (70 mm) Mount wall plate using 4 sets of 5/16 lag bolts (a) and washers with a 1/2 in.
- Page 9 Install Arm Extensions then Fasten It Step 5 Remove the pre-assembed screws from the extensions and save them to use. Insert the extensions into the Fasten the Screws x4 removed from extensions Hang 02 and 03 onto 01, and using Screwdriver secure with pre-assembled screws and washer...
- Page 10 Step 6 Hang TV onto the arm extensions Hang TV with brackets Step 7 Secure TV Secure TV with brackets against the arm extensions with the pre-assembled screws [S3] . [S3] Screw driver...
- Page 11 Step 8 Tilt Adjustment To adjust the tilt in both sides, loosen both tilt levers and move panel to desired position. Tighten both tilt levers to hold desired tilt. ！ LOOSEN ！ TIGHTEN Step 9 Level Adjustment If needed, the TV can be leveled +/-3 degrees. Loosen 2 screws [S1] Level the TV Tighten 2 screws...
- Page 12 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)