Charcoal Filter - Miele DA 4208V D Operating And Installation Instructions

After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
 If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, press
the operating hours control  for
approx. 3 seconds, until only 1 is
flashing.
The grease filter symbol  goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
Cleaning and care
 Press the operating hours
control  for approx. 6 seconds,
until only 1 is flashing.

Charcoal filter

With recirculation mode, a charcoal
filter must be fitted in addition to the
grease filters. The charcoal filter is
designed to absorb cooking odours.
The charcoal filter is fitted in the canopy
above the grease filters.
Fitting/replacing charcoal filters
 Remove the grease filter before fitting
or replacing a charcoal filter.
 Take the charcoal filter out of its
packaging.
 Press the charcoal filter into the
frame.
 Refit the grease filters.
37