Table of Contents
Advertisement
Operation (Automatic and Manual modes)
Adjusting or deactivating the filter
saturation indicator for the charcoal
filter
The charcoal filter is needed for
recirculation mode.
The filter saturation indicator can be set
to suit the customer's cooking habits.
It has to be deactivated for vented
mode.
The factory default setting is an interval
of 180 hours.
Switch off the blower and the lighting.
Touch the delayed shutdown
control and the charcoal filter
control at the same time.
The charcoal filter symbol and one of
the blower power level indicators will
flash.
The indicators 1 to B show the current
time setting:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
B ......................................... Deactivated
Touch the relevant control to select
the duration required.
Confirm your choice by touching the
charcoal filter control .
All the indicator lights will go out.
If the new setting is not confirmed
within 4 minutes, the ventilation hood
will revert to the previous setting.
32
Checking the filter saturation
indicator
Before the set operating time has run
out, you can check what percentage of
the time has elapsed.
Press the On/Off control to turn
the blower on.
Press and hold the grease filter
control or the charcoal filter
control .
One or more of the power level
indicators will flash.
The number of flashing indicators
shows the elapsed operating time as a
percentage.
1 ................................................... 25 %
1 and 2 ........................................ 50 %
1 to 3 ........................................... 75 %
1 to B ......................................... 100 %
The elapsed operating time remains
stored in the memory when the
ventilation hood is turned off or in the
event of an interruption to the power
supply.
Advertisement
Table of Contents
