South Korea - Pepperl+Fuchs IUH-F192-V1 Series Manual

IUH-F192-V1-*
Product Description
Number of channels: 10
Channels used: 1, 2, 3, ... 10
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All ten channels are always used.
3.3.17

South Korea

In South Korea, the use of RFID in the UHF range is regulated as follows:
UHF frequency range: 917.2 MHz
Radiated power: 10 mW
Channel bandwidth: 200 kHz
Channel spacing: 600 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
Number of channels: 6
Channels used: 1, 4, 7, 10, 13, 16
Center frequencies: 917.1 MHz + (M x 0.20) MHz
All 6 channels are always used.
3.3.18 Thailand
In Thailand, the use of RFID in the UHF range is regulated as follows:
UHF frequency range: 920 MHz ... 925 MHz
Radiated power: 10 mW
Channel bandwidth: 500 kHz
Channel spacing: 500 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
Number of channels: 10
Channels used: 1, 2, 3, ... 10
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All ten channels are always used.
3.3.19 United States of America
In the USA, the use of RFID in the UHF range is regulated in accordance with the provisions set
out by the Federal Communications Commission (FCC).
UHF frequency range: 902 MHz
Radiated power: 10 mW
Channel bandwidth: 500 kHz
Channel spacing: 500 kHz
Frequency access method: frequency hopping spread spectrum (USA). See chapter
3.2.7.
Number of channels: 50
Channels used: 1, 2, 3, ... 50
Center frequencies: 902.25 MHz + (M x 0.5) MHz
All 50 channels are always used.
22
920.4 MHz
4000 mW ; Default = 800 mW
EIRP
4000 mW ; Default = 800 mW
EIRP
928 MHz
4000 mW ; Default = 800 mW
EIRP
(IUH-F192-V1-FR2)
EIRP
(IUH-F192-V1-FR2)
EIRP
(IUH-F192-V1-FR2-02)
EIRP