Argentina - Pepperl+Fuchs IUH-F192-V1 Series Manual

IUH-F192-V1-*
Product Description
3.3.1 European Union
In the European Union, the use of RFID in the UHF range is regulated by EN 302208.
UHF frequency range: 865 MHz
Radiated power: 10 mW
Channel bandwidth: 200 kHz
Channel spacing: 600 kHz
Frequency access method: programmable frequency list
Number of predefined channels: 4
Programmable channels: 4, 7, 10, 13
Center frequencies: 865.7 MHz, 866.3 MHz, 866.9 MHz, 867.5 MHz
Up to four channels can be parameterized and used in sequence.
Default: dense reader mode on channel 4, 10, 7, 13. See chapter 3.2.6.
3.3.2

Argentina

The regulations for the UHF frequency range in Argentina are the same as the regulations for
the UHF frequency range in the USA. See chapter 3.3.19.
3.3.3 Australia
In Australia, the use of RFID in the UHF range is regulated as follows:
UHF frequency range: 920 MHz ... 926 MHz
Radiated power: 10 mW
Channel bandwidth: 500 kHz
Channel spacing: 500 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
Number of channels: 12
Channels used: 1, 2, 3, ... 12
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All 12 channels are always used.
3.3.4 Brazil
In Brazil, the use of RFID in the UHF range is regulated as follows:
UHF frequency range: 915 MHz
Radiated power: 10 mW
Channel bandwidth: 250 kHz
Channel spacing: 250 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
Number of channels: 52
Channels used: 1, 2, 3, ... 52
Center frequencies: 914.875 MHz + (M x 0.25) MHz
All 52 channels are always used.
3.3.5 Canada
The regulations for the UHF frequency range in Canada are the same as the regulations for the
UHF frequency range in the USA. See chapter 3.3.19.
18
868 MHz
2000 mW ; Default = 500 mW
ERP
4000 mW ; Default = 800 mW
EIRP
928 MHz
4000 mW ; Default = 800 mW
EIRP
(IUH-F192-V1-FR1)
ERP
(IUH-F192-V1-FR2)
EIRP
(IUH-F192-V1-FR2)
EIRP