Control Data Cyber 170 Series Operator's Manual page 140

5. Enter PFDUMP parameters in the following format •.
K. option l =value l , option 2 =value 2 , ••. , option
n
=value
n
.
®
If it is desired to dump all permanent files residing on the normal family of perma-
nent file devices, no options need be specified (there is typically only one family of
permanent file devices present in the system). This is considered a full permanent
file system dump. In this case, the default value for all options will be assumed.
For example, the dump will be written to an archive file named TAPE.
If
the
archive file is to reside on magnetic tape, a 7-track tape unit must be assigned
(see step 6); system default density is assumed.
"M"
PERMANENT FILE UTIL~TY OPTION DESCRIPTION
OPTION DESCRIPTION-
UT "UTILITY" "LD" - PFLOAD
"DU" - PFDUMP
"(A" - PFCAT
"AT" - PFATC
"(PH - PFCOPY
"""
LO "LIST OPTION" T FILES PROCESSED CATALOG.
C - PERMANENT FILE
DEVICES CATALOG
E - ERRORS
S - SUMMARY
OP "UTILITY OPTIONS" C - CREATION"
A - LAST ACCESS"
M - LAST MODIFICATION"
I - INDIRECT ACCESS""
D - DIRECT ACCESS""
B - BEFORE
P - PURGE AFTER DUMP
R - REPLACE
N - NONINITIAL LOAD
Q -
ADD CATALOG AND PERMIT RECORDS
E - EXTRACT CATALOG IMAGE RECORD
o - OMIT CATALOG IMAGE RECORD
NOTE: OPTIONS ARE ENTERED AS FOLLOWS -
"
""
LO
=
TCS OR
OP
=
CIBP
ONLY ONE TYPE OF DATE MAY BE SPECIFIED
ONLY ONE ACCESS OPTION MAY BE SPECIFIED
Figure 5-3. Right Screen K Display
5-4 60435600 A