Positioning The Heat Pump; Levelling The Heat Pump; Removing The Transport Brackets - Viessmann Vitocal 300-G Series Installation And Service Instructions Manual

Positioning the heat pump

Position the heat pump according to the details on
page 11.

Levelling the heat pump

Fig. 5
Note
If the adjustable feet are used to compensate for an
uneven floor (max. 10 mm), the pressure load on the
feet must be distributed evenly.

Removing the transport brackets

!
Please note
Operating the appliance without first removing
the transport brackets will cause vibrations and
excessive noise.
Undo the transport brackets and secure them to
the base support.
4x
Installation sequence
13