Technibel KPSW 2 Installation Instructions Manual page 12

F
DEcLaratIon oF conForMItY
This product is marked
GB
– Low voltage no. 006/95/EC (Standard: EN60335--40:003 (incl. Corr.:006) + A11:004 + A1:005 + A13:01
+ A1:006 + A:009 con EN 60335-1:00 + A11:004 + A1:004 + A1:006 + A:006 + A13:008 + A14:010 +
A15:011).
I
– Electromagnetic compatibility no. 004/108/EC, 9/31 EEC and 93/68 EEC. (Standard: EN55014-1 (006) + A1(009)
+ A(011), EN 55014- (1997) + A1(001) + A (008), EN 61000-3- (006) + A1(009) + A(009), EN 61000-3-3
E
(008)
– RoHS no.011/65/EU.
D
contEnts
1 - GEnEraL
1.1 - ForEworD
• The equipment must be installed, started-up and maintained
by authorised and qualified personnel, in accordance with
local rules and professional standards.
1.2 - GEnEraL sUppLY conDItIons
• Generally speaking, the material is transported at the
consignee's risk.
• The consignee must immediately provide the carrier with
written reserves if he finds any damage caused during
transport.
1.3 - voLtaGE
• Before any operation, check that the voltage and the
frequency indicated on the device corresponds with that
of the mains.
2 - prEsEntatIon
• See technical documentation.
2.1 - DEscrIptIon
2
3
4
1
5

as it satisfies Directives:
1 - General ................................................................................. 
 - Presentation ......................................................................... 
3 - Installation ............................................................................ 3
4 - Connections / Wiring diagrams ............................................. 7
5 - Accessories .......................................................................... 9
6 - Starting ................................................................................. 9
7 - Maintenance ......................................................................... 9
1 - Air inlet (suction)
2 - Air outlet (blowing)
3 - Vertical deflection louvre
4 - Horizontal deflection louvre
5 - Air filters
1.4 - prEcaUtIons
1.4.1 - HYDraULIc cIrcUIt
- Minimum water inlet temperature : 4°C.
- Maximum water inlet temperature : 60°C.
- Maximum operating pressure
1.4.2 - aMBIEnt aIr
- Minimum air recirculation temperature : 5°C.
- Maximum air recirculation temperature : 3°C.
Important: During installation shut-down, in case of ambient
temperature near 0°C, there is a risk that the hoses may freeze.
Envisage draining the hydraulic circuit.
1.5 - UsE oF EqUIpMEnt
• This equipment is intented for the air-conditioning of
premises and to provide comfort for the personnel.
1.6 - MoDELs
• "-pipe" for all sizes.
3 4
2
1
Materials:
: 16 bar.
5
• Painted metal frame.
• Plastic body.
• Copper pipping.