Computer Setup-Security - HP EliteDesk 705 G5 Maintenance And Service Manual

Table 5-1 Computer Setup—Main (continued)
Option
Change Date and Time
Set Machine Unique Data
System IDs
Replicated Setup
Save Custom Defaults
Apply Custom Defaults
and Exit
Apply Factory Defaults
and Exit
Ignore Changes and Exit
Save Changes and Exit
Suppress POST errors
Computer Setup—Security
NOTE: Support for specific Computer Setup options can vary depending on the hardware configuration.
Table 5-2 Computer Setup—Security
Option
Create BIOS
Administrator Password
Description
Network Configuration Settings
●
Update System and Supported Device Firmware Using Local Media
●
Allows you to set system time and date.
Lets you update the following values:
● Feature Byte
Build ID
●
Serial Number
●
● SKU Number
● Product Family
● System Board CT Number
Product Name
●
Lets you set the following values:
Asset Tracking Number
●
Ownership Tag
●
Backup current settings to USB device
Saves system configuration to a formatted USB flash media device.
Restore current settings from USB device
Restores system configuration from a USB flash media device.
Saves the current system configuration settings as the custom default set.
Applies the custom default settings to the computer after rebooting. Does not apply to options in the
Security menu.
Restores the factory system configuration settings to the computer after rebooting. Does not apply to
options in the Security menu.
Exits Computer Setup without applying or saving any changes.
Saves changes to current system configuration, exits Computer Setup, and reboots.
Causes error messages not to display during Power-On Self Test.
Description
Lets you set and enable a BIOS administrator password, which controls access to the following features:
Setup Menu (F10)
●
● 3rd Party Option ROM Management (F3)
● Update system ROM
Computer Setup (F10) Utilities 55