Table of Contents
Advertisement
Graphics processor and heat sink assembly
IMPORTANT:
entire unit.
For a list of available graphics processors, see
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the fan cable from the system board (1).
4.
Remove the two screws (2) that secure the graphics processor bracket to the chassis, and then lift the
graphics processor assembly out of the chassis (3).
To install the graphic processor and heat sink, reverse the removal procedure.
30
Chapter 4 Removal and replacement procedures
Do not remove the heat sink/fan from the graphics processor. Remove the assembly as an
(Access panel on page
Computer major components on page
(Preparation for disassembly on page
23).
8.
22).
Hide quick links:
Advertisement
Table of Contents
