Victor 6056B User Manual page 26

Note:
• Do not input the signal above 250V, otherwise, the
meter may be damaged and the user may be hurt.
• After the measurement is over, immediately
disconnect the test probe and the tested circuit.
• The signal measurement value above 1000 kHz is for
reference only.
2-7. AC/DC Current Measurement
A) Turn the
function/range key
to "
in the right figure.
B) Press the SELECT
key to choose AC or
DC measurement
mode.
C) If used for devices nearby electromagnetic field,
unstable or incorrect readings may be displayed;
D) Please press the REL key to reset before current
measurement.
E) Press the head trigger to open the head and use the
" as shown
24