Victor 6056B User Manual page 19

Note: When 400Ω is used, it is necessary to short circuit
the test probe to test the resistance of the lead, which
will be deducted from the actual test.
2-4. Diode Measurement and Continuity Test
2-4-1. Diode Measurement
A) Turn the
function/range
SELECT switch
gear. Press
the SELECT key to
choose the desired
diode measurement
mode.
B) Respectively insert the
red test probe and
black test probe into
the VΩ and COM
ends.
C) Connect the red test probe onto the positive of the
diode and the black test probe onto the negative.
D) Read the currently measured result from the display.
17