Understanding The Keypad Indicators; Operating The Keypad - finmon mi64 User Manual

2.1 Understanding the keypad indicators

For the location of the indicators please see Figure 1: The Keypad.
Power Indicator
Green Mains power is connected to the panel and is functioning correctly.
There are no fault conditions.
Red A fault condition has occurred. This could be loss of mains power, low
battery or other system fault. Refer to section 12.1 for troubleshooting.
Home 1 and Home 2 Indicators
Green You are viewing the profile that is illuminated green and the zone
indicators will show the status of the zones in this profile.
Flashing The home profile is in entry/exit delay mode, and will shortly arm.
Orange
Red The system in armed in the Home 1 or Home 2 profile.
Partition (P) Indicators
Bright This is the active partition and it is ready to arm. The zone
Green indicators for the zones belonging to this partition will be
displaying their status.
Dim The partition is available, but is not the active partition you are
Green viewing. To view this partition, touch the [P] key and it will turn
bright green.
Orange Not ready to arm. A zone is violated.
Red The partition is armed.
Flashing This partition is in entry/exit delay mode, and will shortly arm.
Orange
Zone Indicators
Extinguishe Not violated.
d
Flashing Violated zone.
Illuminated The zone is bypassed.
By default LEDs 1-16 display zones 1-16- however this may be programmed
per partition. Please speak to your installer to see how they have set up your
zone indicators.

2.2 Operating the Keypad

The function of your keypad: