Troubleshooting - finmon mi64 User Manual

Troubleshooting

In this section we have given some advice for standard problems that you may
encounter. If you cannot find a solution here, please contact your installer or
monitoring company.
12.1 Fault Conditions
If a fault condition occurs your power indicator will turn red. You can view the
fault, and depending on the type can resolve it yourself or contact your
installer/monitoring company.
When
How
12.1.1 Fault Indicators and what to do
Zone Fault Conditions
Status
Indicator
1 Siren Tamper
2 Auxiliary 12V
Tamper
3 Box Tamper
4 AC Loss
5 Communication
Fail
6 Low Battery
7 Device Tamper
8 Device Loss
9 Network Trouble
Mi64 2017
Your power indicator is flashing and you want to know
what the fault is.
 Touch [ALT] then [7].
 An illuminated zone indicator/s will indicate the
fault condition/s.
 Refer to 12.1.1 to see what fault has occurred.
Suggested Action
Contact your installer.
Contact your installer.
Contact your installer.
Check that plug for the AC is in place
and turned on. If it is, and the fault is not
cleared- contact your installer.
Contact your installer.
Check that the plug for the mi64 is in
place and turned on.
If it is, and the fault is not cleared-
contact your installer.
Contact your installer.
Contact your installer.
Contact your installer.
27