Bypassing Zones - finmon mi64 User Manual

Note
5.5 Auto Arming
Your system may be set to auto arm at a preprogramed time or day. If you
require this function, please ask your installer to set it up for you.
5.6 Arming with Entry/Exit or Follower Zones Violated
Your installer may have set up the system so that you can arm with the
entry/exit or follower zones violated. This means for example, you can arm with
the front door open. If enabled, arm as normal by entering a valid [USER
CODE].
5.7 Forced Arming
If enabled by your installer, you will be able to arm the system even if there are
violated zones. If the violated zone is then cleared while in armed mode, it will
be monitored as normal.
For example, if you have a monitored window by your front door which is open,
you could arm the panel then close the window on your way out. The window
would then be monitored as normal. If you didn't close the window, monitoring
for it would not be enabled.

6 Bypassing Zones

When
Mi64 2017
partition/profile indicator will turn red. Any
bypassed zones will be illuminated red on the zone
indicators.
 On successful arm you will get a confirmation flash
on your remote.
You can add additional remotes when you add users. See
section 10.2 for more information.
When you want to arm a partition or home profile, but not
all the zones contained within it. For example, you may
have a tree that is causing your outside beams to trigger a
false alarm, or have someone working late in a section of
15